In Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering
The performance of a flue gas desulfurization (FGD) system is characterized by SO2 removal efficiency (Y1) and reagent conversion (Y2). Achieving a near-perfect reaction environment has been of concern in dry FGD (DFGD) due to the low reactivity compared to the wet and semi-dry units. This study will appraise output responses using modeling by response surface methodology (RSM) and artificial neural networks (ANN) approaches. The impacts of input parameters like hydration time, hydration temperature, diatomite to hydrated lime (Ca(OH)2), sulfation temperature and inlet gas concentration will be studied using a randomized central composite design (CCD). ANN fitting tool mapped the CCD metadata using the Levenberg-Marquardt (LM) algorithm activated by the hyperbolic tangent (tansig) function. The hidden cells ranged from 7 to 10 to ascertain the effect node architecture on modeling accuracy. Validation of each procedure was assessed using root mean square error (RMSE), mean square error (MSE) and R-Squared studies. The outcomes presented a more accurate 5-10-2 ANN model in the mapping of the DFGD from R2 data of Y1 = 0.993 and Y2 = 0.9986 with a mapping deviation from the RMSE values of Y1 = 0.48465; Y2 = 0.44971 and MSE results of Y1 = 0.23488; Y2.= 0.20229.
Makomere Robert, Rutto Hilary, Koech Lawrence
2023-Feb-09
Deep learning, emission control, empirical modeling, utilization
